Panasonic CS-HZ25UKE User Manual page 10

Connection network using WPS mode (method 1)
1
Press the WPS button from the router that will
be connected to an air conditioner.
• Check that the Wireless LAN LED is ON.
2
• Select Easy setting (WPS) from remote
*1
*1 The interfaces shown here refers to models with wireless remote controller,
however models with wired remote controller shares the same interfaces and
illustrations. Please refer wired remote controller display selection to perform the
app settings.
If the Wireless LAN LED is OFF, select the
WLAN ON/OFF to turn it on, and enable
Wireless LAN connection.
controller.
(Remote Controller Display)
Function setup 12:00,Mon
Powerful
Quiet
Filter check
WLAN
Select Confirm
WLAN
12:00,Mon
WLAN ON/OFF
Easy setting (WPS)
Advance setting (AP)
Device registration
Select Confirm
WLAN ON/OFF
12:00,Mon
Request
Confirm
3
4
10
• When the connection of air conditioner to
router is successful, the Wireless LAN LED
changed from blinking to ON.
• If the Wireless LAN LED keep blinking, check
the wireless router connection.