Table of Contents
Advertisement
Picture Fault
Small, white specks,
pink lines, streaks or
blotches
Muddy-looking print
Broad streak or mark
across the picture
Very light or no image
28
Cause
Pulling the film
through the rollers
too fast.
Development time not
long enough.
Hesitating while pull-
ing the film from the
camera.
Film fogged or ex-
tremely overexposed.
Corrective Action
Pull the film using a
smooth, even, mod-
erate pull speed.
Develop film for time
recommended in film
instruction sheet.
Pull the film tab
straight out in one
motion, without hesi-
tation.
Do not remove the
safety cover prior to
loading the film.
Do not open the
camera and remove
the film pack while
taking a picture.
Advertisement
Table of Contents
