Operation - Silvercrest SGS 100 B1 Operation And Safety Notes

m WARNING! Do not use this
product if you suffer from any of
the following conditions:
–Skin inflammations
–Wounds/swelling in the face
–Skin reddening
–Diabetes
–Eczema/psoriasis
–Heart disease
ATTENTION! Risk of product
damage! Do not add any
additives, like oil, to the water
container . After the water has
evaporated, these additives may
burn and damage the product .
Setup instructions
Always operate the product on an
even, stable, heat-resistant, clean
and dry surface .
Fire/burn hazard and heat
m DANGER! Risk of fire! Never
leave the product unattended
while it is plugged in .
m DANGER! Risk of fire! Never
heat the product if it does not
contain water .
10 GB
m WARNING! Risk of injury
through burning/scalding!
Do not touch the hot inner parts of
the product . The water is boiling
in the water container during

operation .

ATTENTION! Risk of product
damage! Do not place the
product on or near heat sources
or open fire .
Allow the product and all its parts
to cool down before transporting
or cleaning them .
Do not move the product while it
is in operation or cooling down .
Remove make-up and care
products from your face before
steaming .
Cleaning
Disconnect the product from the
wall outlet during periods of
disuse and before cleaning .
After use, the product should be
cleaned to avoid the accumulation
of grease and other residues .