Advertisement
- AS4060, AS4190 KIT ACQUA STOP - EN
PROCEDURE
6. On 4190 appliances, since no fixing point is
available at the rear due to the absence of the
side panel, the plate D has to be screwed onto
the rear of the cabinet as shown in fig. 6 and 7,
and the base tray is then fixed to it.
7. Final Operations: Replace the feet, the front drip
guard and the plinth. Set the appliance upright
and level it with a spirit level so that it is
perfectly horizontal (max. permitted slant angle:
0.5°).
Note
Once the kit has been fitted, enable the device using the Smeg "TRACELOG" software
programme.
902897-903079
Smeg S.p.A.
Instruments Division
Via Leonardo da Vinci, 4 – 42016 Guastalla (RE) Italy
Tel. +39 0522 8211 – Fax +39 0522 821 592
E-Mail:
instruments@smeg.it
–
www.smeg-instruments.com
5
ILLUSTRATION
service.instruments@smeg.it
Figure 6
Figure 7
-
Advertisement
