auna UltraSonic Pulse V6-40 Manual page 20

EN
20
Repeat a single track
1. Press P-MODE button on unit during play, the display will show
the current track will be played over an over again.
2. To cancel repeat play, press P-MODE button on unit until
from the display..
Repeat all tracks
1. Press P-MODE button on unit until the
display, all tracks on the USB will be played over and over again.
2. To cancel repeat play, press the P-MODE button on unit until
disappears from the display.
Repeat the folder (only for USB which contains more than one folder)
1. Press the P-MODE button on unit until
display, the current folder will be repeated over and over again.
2. To cancel repeat play, press the P-MODE button on unit until
FOLDER disappears from the display
Random play
Press the P-MODE button on unit in play mode till the "RAND" shows
steadily on the display, the random play will start from next track
automatically. Press the P-MODE button on unit again until the "RAND"
disappears from the display to cancel.
BT operation
1. Press the FUNCTION button on unit to switch to BT function, the LCD will
display "bt" and the pair indicator will flash at high speed.
2. Turn on the BT function on the device, scan the unit "PSS 35" and
connect, then input the pass word "0000" (four zeroes) if required, the
pair indicator keep light up to indicate connection done, and the display
will show "bt". Press Play to start playback.
3. Rotate the VOLUME knob on the unit or adjust the volume on the
external device to increase or decrease the music volume to your desired
level.
4. Press and hold the PLAY/PAUSE/PAIR button to disconnect BT.
Note: The BT works best within 10 meters
disappears
shows steadily on the
,
shows steadily on the
and