auna UltraSonic Pulse V6-40 Manual page 19

Microphone echo adjustment
Rotate the ECHO knob on unit to increase or decrease the microphone echo
effect that best matches the style.
Flash light
When the unit is on, there will be blue light around the speaker, press the
LIGHT button once, the blue light flash along with the music rhythm. To
disable the disco light, press the LIGHT button on unit until the display
shows "OFF".
USB operation
This unit provides one USB port for music playback.
1. Press the FUNCTION button on unit to select "USB" mode.
2. Connect the USB memory stick to the USB port found on the front of the
unit. Playback will start automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR button on unit. The
current track No. and P will show on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR button again
5. To select a desired track, press the
playing until the desired track appears on the display. The unit will start
play automatically.
6. To search for a particular passage during playback, press and hold the
or button to scan the current playing track at high speed until
 
desired point (passage) appears, then release the button for normal
playback mode.
7. To select a song which track number exceeds 10, press the FOLDER/10+
button or FOLDER/10- button each time to skip forward/backward 10
tracks, then press the
8. To select a desired folder (if the USB contains more than one folder),
press and hold the FOLDER/10+ or FOLDER/10- button each time to skip
forward/backward a folder, then press the
desired track.
Important note: The USB port is for data transfer only. Other devices cannot
be used via this USB connection. The use of a USB extension cable is not
recommended.
Repeat play
You can play one track or all tracks on the USB repeatedly
or
 
or button to select desired track.
 

, button respectively during
or button to select

EN
19