Table of Contents
Advertisement
・Trouble shooting
In case a problem occurs with your PDP TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized
service center.
• Screen related Matters
Problem
The screen does not appear.
The screen appears too
slowly after the power is turned on.
Screen is too bright or too dark.
Screen is too large or too small.
Stripes appear on the screen
and it shakes.
Screen appears in black and white.
Simultaneous Screen
does not appear.
The screen does not move.
Computer Input Screen is abnormal.
Automatic Turn On does not work.
4 8
Action
Is the power plug pulled out? Insert the power plug. Turn
the main power button on and press the power button of
the remote controller.
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary
screen noise that occurs when the power is turned on. But
if the screen does not come after 1 minute has passed,
contact your dealer or an authorized service center.
Perform brightness adjustment or Contrast adjustment.
(Please refer to page 37)
Adjust the screen size. (Please refer to page 38)
Stop using wireless telephones, hair driers and
electric drills.
Adjust the screen in user mode. (Please refer to page 37)
Check that PDP TV and external equipment are
connected. Check the inputs of simultaneous screen by
pressing sub-screen selection.
Press the STILL button. (Please refer to page 28) Check if
the Pause button is pressed on external equipment.
Execute automatic adjustment by pressing AUTO ADJ
button. If the screen is still abnormal after automatic
adjustment, perform manual fine adjustment. Please refer
to page 41.
Automatic Turn On function works only when turning the
PDP TV off with the remote controller or Standby button.
Advertisement
Table of Contents
