Inserting Batteries Into Remote Controller - Planar PDP 42 Product Manual

If remote controller does not work
1. Check the polarity (+,-) of the batteries in the remote controller.
2. Check that the batteries have power.
3. Check that the PDP is powered and that it is properly plugged in.
4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP.

Inserting batteries into remote controller

1. Firmly press the ▼ part on the
cover and slide the cover in the
direction indicated by the arrow.
2. Insert the batteries, making sure that
the polarities are correct.
3. Close the cover.
CAUTION : Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the national code (Recycling program).
How to use remote controller
The remote controller should be operated within 30feet (7m) and 30 ˚to the left and the right of
・
the IR receiver on the front of the PDP.
・
Used batteries should be disposed properly.
1 5