Changing The Usb Port Protocol - Casio EXILIM EX-Z1200 User Manual

Changing the USB Port Protocol

You can use the procedure below to change the USB
communication protocol that is used when exchanging data with
a computer, printer, or other external device. Select the protocol
that suits the device to which you are connecting.
1.
Press [MENU].
2.
On the "Set Up" tab, select "USB" and then
press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
When you want to connect to this type
of device:
Computer or a printer that supports USB
DIRECT-PRINT (page 220)
With this setting, the computer sees the
camera as an external storage device.
Use this setting for normal transfer of
images from the camera to a computer
(using the bundled Photo Loader with
HOT ALBUM application).
When you want to connect to this type
of device:
Printer that supports PictBridge (page
220)
This setting simplifies the transfer of
image data to the connected device.
Select this
setting:
Mass Storage
(USB DIRECT-
PRINT)
216
Select this
setting:
PTP
(PictBridge)
OTHER SETTINGS