Formatting Built-In Memory - Casio EXILIM EX-Z1200 User Manual

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot be
recovered. Check to make sure you do not need any of the
data in built-in memory before you format it.
• Formatting built-in memory also deletes the following.
– Face Recognition data saved with Record Family
– Protected images
– FAVORITE folder images
– BEST SHOT mode user setups
– Startup screen
• Make sure that the battery is charged fully before starting a
formatting operation. Formatting may not be performed
correctly and the camera may stop operating normally if the
camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in
progress. Doing so can cause the camera to stop operating
normally.
C
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera, remove it.
2.
Press [MENU].
3.
On the "Set Up" tab, select "Format" and then
press [ ].
4.
Use [ ] and [ ] to select "Format" and then
press [SET].
This formats built-in memory.
• To exit the format operation without formatting, select
"Cancel".
• Entering the PLAY mode after formatting the built-in
memory will cause the message "There are no files." to
appear.
218
OTHER SETTINGS