Download Print this page

Renaissance Roman Blind Safe-Release Installation Instructions

Advertisement

Quick Links

Roman Blind Safe-Release
Closed Cassette System with Safe-Release
and Clip-In Adjustable Cord Stoppers with Hole
Installation Instructions
TOOLS REQUIRED
To Install
Please read all safety warning instructions before installation
and keep them in a safe place for future reference.
HOW TO INSTALL
To shorten the Headrail size
Step 1
Remove
the End Cap from
the Headrail
(at the opposite end
from the control end
with the chain).
Step 2
Unlock and
slide back the Fast-
Fit Cord Roller unit
using the cord to pull
it away from the end
you will be cutting
(to unlock simply twist
the clear tab 90°).
Kit
Device
Step 3
Mark the
distance you want to
remove – make sure
you allow 2mm for the
End Cap going back
on! Then using a saw,
cut through the
Headrail and Axle Bar.
TIP: Move the Roller to just before cut point,
this supports the Axle Bar for easier cutting!
Step 4
Once cut, put
the End Cap back in
place and reposition
and secure the
Fast-Fit Cord Roller
(to lock simply twist
the clear tab back 90º).
CHILD SAFE
APPROVED
To Adjust
Width
rca-uk.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Roman Blind Safe-Release and is the answer not in the manual?

Questions and answers

Summary of Contents for Renaissance Roman Blind Safe-Release

  • Page 1 Roman Blind Safe-Release ™ CHILD SAFE Closed Cassette System with Safe-Release Device ™ APPROVED and Clip-In Adjustable Cord Stoppers with Hole Installation Instructions TOOLS REQUIRED To Install To Adjust Width Please read all safety warning instructions before installation and keep them in a safe place for future reference.
  • Page 2 Assembly instructions and NOTE: Safety devices must be used use of child safety devices to ‘Make It Safe’ for compliance Place the blind face down and place the rail onto Blind cord threads the soft loop tape heading on your blind (see through this main hole below).
  • Page 3 How to install and use the Safe-Release Device ™ Make sure you wrap the operating chain round If not inserted already, the housing simply the Safe-Release wheel (fig ) before you insert slides into the headrail as shown above (fig into the chain housing.
  • Page 4 Positioning of Child Safety Devices Cord Roller Cord Clip-In Adjustable Roller Cord Stopper Safe-Release Device Do NOT tie a knot in the Blind Cord! Do NOT tie a knot in the Blind Cord! Clip-In Adjustable Cord Stopper NOTE: When using the with Hole Wheel &...