Pioneer DV-120K-K Operating Instructions Manual page 21

Problem
KURO LINK function does not work.
The message CEC200 appears.
Check
Is the HDMI cable you are using a High
Speed HDMI™ cable?
Is KURO LINK set to On on the player?
Does the connected device support the
KURO LINK function?
Is KURO LINK set to On on the con-
nected device?
Are multiple players connected?
Is the player's power turned off?
Remedy
Use a High Speed HDMI™ cable.
Set KURO LINK to On on the player (page 15).
The KURO LINK function does not work with
devices of other brands, even if connected using an
HDMI cable.
The KURO LINK function will not work if devices
that do not support the KURO LINK function or
devices of other brands are connected between the
KURO LINK-compatible device and the player.
Even when connected to a Pioneer product com-
patible with the KURO LINK function, some of the
functions may not work.
Set "KURO LINK" on the connected component to
"ON". The KURO LINK function works when "KURO
LINK" is set to "ON" for all the components con-
nected to the HDMI OUT terminals.
The KURO LINK function may not work if three or
more players, including this player, are connected
by HDMI cable.
When the Disc Navigator is selected using the
Flat Screen TV's remote controller, the message
CEC200 is displayed if the player's power is turned
off. This is not a malfunction. You may continue
using the player and Flat Screen TV as such.
21
En