Pioneer DV-120K-K Operating Instructions Manual page 19

Problem
During playback, picture is disturbed
or dark.
Digital audio signals are not output
from the COAXIAL DIGITAL AUDIO
OUT terminals.
96 kHz/ 88.2 kHz digital audio signals
are not output from the COAXIAL
DIGITAL AUDIO OUT terminals.
Folder or file names are not recog-
nized.
Folder or file names are not dis-
played or are not properly displayed.
Time is required to play JPEG files.
Black bars are displayed when play-
ing JPEG files.
When a USB device is connected
Problem
USB device is not recognized.
File cannot be played.
Folder or file names are not dis-
played or are not properly displayed.
Check
This is not a problem with the player.
Are the player and TV connected via a
video deck?
Is the TV system properly set?
Is Digital Out set to On?
Is 96 kHz PCM Out set to 96kHz?
Are you playing a copyright-protected
disc?
Have you exceeded the maximum num-
ber of folder or file names the player
can recognize?
Do the folder or file names contain any-
thing other than 1-byte alphanumeric
characters?
Are you playing large files?
Are you playing files with different
aspect ratios?
Check
Is the USB device properly connected?
Is the USB device connected via a
USB hub?
This is not a problem with the player.
This is not a problem with the player.
Is the file copyright-protected (by
DRM)?
This is not a problem with the player.
This is not a problem with the player.
Do the folder of file names contain
more than 14 characters?
Remedy
This player supports Macrovision copy protection.
With some TVs, the picture may not display prop-
erly when playing discs including copy prevention
signals. This is not a malfunction.
When the player and TV are connected via a video
deck, the player's analog copy protect function may
cause the picture being played on the video deck
not to display properly. Connect the player and TV
directly.
The factory default setting is AUTO. If the picture is
distorted, switch the TV system to the one used in
your country or region (NTSC or PAL) (page 23).
When connected to the COAXIAL DIGITAL AUDIO
OUT terminals, set Digital Out to On (page 14).
Set 96 kHz PCM Out to 96kHz > 48kHz.
The 96 kHz/ 88.2 kHz digital audio signals of copy-
right-protected discs cannot be output.
Up to 299 folders can be recognized on one disc.
Up to 648 files can be recognized within one folder.
Depending on the folder structure, however, the
player may not be able to recognized certain folders
or files.
Folder and file names can be displayed. Note,
however, that only 1-byte alphanumeric characters
can be displayed. Folder and file names including
characters other than 1-byte alphanumeric char-
acters may be displayed for example as F_001 or
FL_001, and the characters may be garbled.
Some time may be required to display large files.
Black bars may be displayed along the top and bot-
tom or sides when JPEG files with different aspect
ratios are played.
Remedy
Connect the device securely (all the way in).
This player does not support USB hubs. Connect
the USB device directly.
This player only supports USB mass storage class
devices.
This player supports portable flash memory and
digital audio playback devices.
Only the FAT16 and FAT32 file systems are sup-
ported. Other file systems (exFAT, NTFS, etc.) are
not supported.
Turn the power off then back on.
Some USB devices may not be recognized properly.
Copyright-protected files cannot be played.
Files stored on a computer cannot be played.
It may not be possible to play some files.
The maximum number of characters displayable
for the folder and file names on the Disc Navigator
is 14.
19
En