Snapshot Tutorial; Using The Control Panel - Casio EXILIM EX-S9 User Manual

Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will cause a Control Panel to appear along the right side
of the monitor screen. The settings available for the currently
selected Control Panel also appear. You can use the control
panel to configure various camera settings.
2.
Use [8] and [2] to select the setting you want to change.
Snapshot image size/quality*
1
(pages 31, 65)
Movie image quality (page 34)
2
Flash (page 35)
3
Self-timer (page 37)
4
AF Area (page 38)
5
ISO sensitivity (page 40)
6
easy Mode (page 41)
7
Face Detection (page 43)
8
Date/Time (page 44)
9
* Snapshot image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 54).
• The Control Panel cannot be displayed while an easy Mode, For YouTube, or
Voice Recording Operation is in progress.
Available settings
30
[8] [2] [4] [6]
[SET]
Control Panel
1
2
3
4
5
6
7
8
9
Snapshot Tutorial