Tesla Y 2019 Owner's Manual page 41

Software version: 2022.16 japan
Hide thumbs Also See for Y 2019:
Table of Contents

Advertisement

Before seating a child, ensure that the child restraint
system is securely installed. Grasp the front of the child
restraint system with one hand on each side, and
attempt to:
• Twist the child restraint system from side to side.
• Pull the child restraint system away from the seat.
If the child restraint system rotates or moves away from
the seat, both latches are not fully engaged onto the
seat's anchor bars. You must reinstall it and try again. It
is critical that both latches on the child restraint system
are fully engaged.
WARNING: Do not use ISOFIX/i-Size anchors with
child restraint system or booster seats that have an
integral safety belt where the combined weight of
the child plus the child restraint system exceeds 33
kg.
Safety Leg
All passenger seats Model Y support the use of a child
restraint system with a safety leg. If the child restraint
system is equipped with a leg, extend the leg as
described in the instructions provided by the
manufacturer of the child restraint system.
Seating and Safety Restraints
Child Safety Seats
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its hook to
the anchor point located behind the rear seat.
NOTE: The location of anchor points may not be readily
visible but can be found by identifying a slice in the
seat's material.
WARNING: Tighten upper tether straps according
to the instructions provided by the manufacturer
of the child safety seat.
WARNING: USE ONLY SEAT BELT RETAINED
CHILD SAFETY SEATS IN THE CENTER SEATING
POSITION.
Make sure the hook is fully seated on the anchor point.
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Y 2020Y 2021Y 2022

Table of Contents