Tesla Y 2019 Owner's Manual page 28

Front and Rear Seats
WARNING: To minimize the risk of severe injury or
death in the event of a collision, ensure that head
supports are positioned correctly before driving.
Removing/Installing a Head Support
All head supports in the second seating positions can be
removed. To remove a head support:
1. Fully raise the head support by pulling it upward.
2. Press and hold the button located at the base of one
of the posts.
3. Insert a short, flat object (such as a small flat-head
screwdriver) into the opening in the base of the
opposite post and pull the head support upward.
To re-install the head support:
1. With the front of the head support facing forward,
insert both posts into the corresponding holes on the
seat back.
2. Press downward on the head support until it clicks
into place.
3. Pull upward on the head support to ensure that it is
secure.
WARNING: Ensure that the head support is
correctly installed before seating an occupant.
Failure to do so increases the risk of injury or
death if a collision occurs.
Seat Heaters
The front and second row seats contain heating pads
that operate at three levels from 3 (highest) to 1
(lowest). To operate the seat heaters, see
Controls on page 130.
26
WARNING: To avoid burns resulting from
prolonged use, individuals who have peripheral
neuropathy, or whose capacity to feel pain is
limited because of diabetes, age, neurological
injury, or some other condition, should exercise
caution when using the climate control system and
seat heaters.
Seat Covers
WARNING: Do not use seat covers in Model Y.
Doing so could restrict deployment of the seat-
mounted side air bags if a collision occurs. Also, if
the vehicle is equipped with an occupant detection
system that is used to determine the status of the
passenger front airbag, seat covers may interfere
with this system.
Climate
MODEL Y Owner's Manual