Install A Raid Adapter - Lenovo ThinkSystem SN850 Setup Manual

Figure 29. Connecting the cable to RAID adapter
Step 8. Reinstall the RAID adapter (see
Step 9. Route the cable in front of DIMM slots by inserting into clip mounted on side of storage cage.
Figure 30. Routing the cable
After you install the interposer card, complete the following steps:
1. For configure the RAID array, see

Install a RAID adapter

Use this information to install a RAID adapter option.
Before you install a RAID adapter, complete the following steps:
1. Read "Installation Guidelines" on page 28
2. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the
bezel pointing toward you.
3. Remove the compute node cover (see
To install the RAID adapter, complete the following steps:
ThinkSystem SN850 Compute Node Setup Guide
52
"Install a RAID adapter" on page 52
"RAID configuration" on page 78
to ensure that you work safely.
"Remove the compute node cover" on page 32
for instructions).
for instructions.
for instructions).