Example For Mintime/Maxtime Logic - netvox R718WA2 User Manual

Description Device
Config
ReportReq
Config
ReportRsp
R718WA2
ReadConfig
ReportReq
ReadConfig
ReportRsp
1. Configure device parameters MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v
Downlink: 0146003C003C0100000000
The device returns:
8146000000000000000000 (configuration is successful)
8146010000000000000000 (configuration is failed)
2. Read device configuration parameters
Downlink: 0246000000000000000000
The device returns:
8246003C003C0100000000 (device current configuration parameter)

5.3 Example for MinTime/MaxTime logic

Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V
MaxTime
Sleeping(MinTime)
Wakes up and collects data
REPORTS 3.6V
Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange
value.
Cmd Device
ID Type
MinTime
0x01
(2bytes Unit:s)
0x81
0x46
0x02
MinTime
0x82
(2bytes Unit:s)
Wakes up and collects data
REPORTS 3.6V
NetvoxPayLoadData
MaxTime
(2bytes Unit:s)
Status
(0x00_success)
(9Bytes,Fixed 0x00)
MaxTime
(2bytes Unit:s)
MaxTime
Sleeping(MinTime)
Wake up and collects data
REPORTS 3.6V
7
BatteryChange
(1byte Unit:0.1v)
Reserved
(8Bytes,Fixed 0x00)
Reserved
BatteryChange
(1byte Unit:0.1v)
Reserved
(4Bytes,Fixed 0x00)
Reserved
(4Bytes,Fixed 0x00)