Advertisement
Thermostat knob
Turn the thermostat knob to 'MAX'. The fan heater will begin running and the power
indicator will illuminate. Run the fan heater until the desired room temperature is reached.
Turn the thermostat anticlockwise until you hear a click which will switch the fan heater off.
The fan heater will then periodically turn on/off automatically to maintain the desired room
temperature.
Note:
The fan heater will not switch on if the desired room temperature is higher than the
current room temperature.
Oscillation
• Toggle the oscillation switch located on the back of the fan heater to the '–' position
to turn oscillation on.
• Toggle the oscillation switch to the 'O' position to turn oscillation off.
Powering off
Turn the thermostat knob to the 'MIN' position and the turn the fan/heat knob to the '0'
position. Switch the power off at the socket.
Fall protection
This fan heater is protected with a safety switch that turns the fan heater off automatically
if it falls over or is laying in an excessively horizontal angle. This assists in preventing risk of
fire, overheating, and other accidents.
Place the fan heater upright to resume normal operation.
Advertisement
