AVT MAGIC DABMUX plus Training page 59

EDI Output (2)
 LI DELAY: Maximum time delay in the transmitting network.
 DCP SPREAD INTERVAL: Time spread of the packets of a DAB frame.
The smaller the value, the more the sending of the packets of a DAB frame approaches a burst. The
larger the value, the more the packets of two DAB frames overlap. This allows the error protection to
better correct potential burst errors.
 FEC LEVEL: Error protection level 0-3
A higher level provides more protection against packet loss, but requires a higher bandwidth
(approx. 35% for FEC level 3). The value directly indicates how many packets can be corrected.
But: The higher the value, the more packets are generated..
 MTU: Maximum size of UDP payload in bytes
 DESTINATIONS 1 – 4: The EDI data stream can be sent to up to 4 destinations.
For each destination must be set:
Network

 IP Address (Unicast or Multicast)
 Port
59