Advertisement
Recovery from SD card(4)
Once the system is booted, the flash memory of the system needs to
be programmed with the bootloader and firmware from the SD card via
the website.
Use LAN 1 to connect to the system.
The system uses the configured IP address. If readout fails, the factory
setting (192.168.96.102) is used.
Enter the IP address in a web browser that supports HTML5.
Click RECOVERY in the UPDATE section of the web interface.
If firmware recovery via SD card failed before, you can click FORMAT FILE SYSTEM
first to clear the system completely.
Attention! All settings will be lost.
176
Advertisement
