Inalto IOMC6013T User Manual page 20

Installation of hooks and rail brackets
rail brackets
1. Install 4 hooks
Installation Instructions (Continued)
3. Install the left and Right Rail Bracket(take the installation of the left rail bracket for instance)
① First, install the hook into the hole a；
①
② Then, push the hook into the hole b;
①
③ Finally, push the hook down to the right place.
① Take the rail bracket up along the left groove of
the hook ；
Installation of hooks and rail brackets
INSTALLING THE HOOKS AND RAIL BRACKETS
② ②
1. Install the four hooks by following the steps below.
(a) First, install the hook into the hole a
1. Install 4 hooks
(b) Then, push the hook into the hole b
(c) Finally, push the hook down to sit in place
③
3. Install the left and Right Rail Bracket(take the installation of the left rail bracket for instance)
③
① Take the rail bracket up along the left groove of
the hook ；
②
2. Disdinguish the Left and Right Rail Bracket
Rail Bracket
③
③
③ Move down the rail bracket into the bottom of the
2. Get the left and right rail brackets.
groove hook;
2. Disdinguish the Left and Right Rail Bracket
③ Move down the rail bracket into the bottom of the
LEFT
3. Install the left and Right Rail Bracket(take the installation of the left rail bracket for instance)
3. Install the left and right rail brackets by following
① Take the rail bracket up along the left groove of
the steps outlined below (for Left Bracket).
The left rail bracket
the hook ；
(a) Take the rail bracket up along the left groove
of the hook.
The left rail bracket
10
③ Move down the rail bracket into the bottom of the
groove hook;
① First, install the hook into the hole a；
①
② Then, push the hook into the hole b;
③ Finally, push the hook down to the right place.
②
③
①
①
①
②
②
③
groove hook;
RIGHT
The right rail bracket
3. Install the left and Right Rail Bracket(take the installat
① Take the rail bracket up along the left groove of
the hook ；
② Move the rail bracket right as shown in the figure;
(b) Move the rail bracket right, as shown below.
① First, install the hook into the hole a；
② Then, push the hook into the hole b;
③ Finally, push the hook down to the right place.
② Move the rail bracket right as shown in the figure;
③ Move down the rail bracket into the bottom of the
(c) Move the rail bracket down into the bottom
groove hook;
of the groove hook.
④ Finished.
④ Finished.
② Move the rail bracket right as shown in the figure;
The right rail bracket
10
20
④ Finished.
The right rail bracket
② Move the r
④ Finished.
11