Table of Contents
Advertisement
Before First Use
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
•
Before using this appliance read this manual, taking
special note of the 'Safety Instructions' section.
•
Ensure that all packaging materials are removed
from the appliance.
SETTING THE OVEN CLOCK
1.
In waiting state, touch the
clock setting mode. "00:00" will display and the hour
figures will flash.
2. Touch the – / + or slide the slider bar to set the hour
figures. The input time should be within 0-23.
3. Touch the
to confirm, then the minute figure
will flash.
4. Touch the – / + or slide the slider bar to set the
minute figures. The input time should be within 0-59.
5. Touch
to finish clock setting, ":" will flash.
The time is now set and the appliance will enter
waiting state.
CLEANING THE ACCESSORIES
Before you use the accessories for the first time,
clean them thoroughly with hot soapy water and
a soft dish cloth.
HEATING UP THE OVEN
To remove the new cooker smell, heat up the oven when
it is empty and closed. One hour with convection at
250°C is ideal. Ensure that no packaging remnants have
been left in the cooking compartment.
1.
In waiting state, touch the F button once. The
default temperature and conventional symbol will
show on the display.
2. Touch the F button repeatedly until the convection
symbol displays. The default temperature of
convection will display.
3. Touch the – / + or slide the slider bar to set the
temperature tp 250°C.
4. Touch
to enter cooking time setting mode.
"00:00" will flash.
5. Touch – / + or slide the slider bar to set the cooking
time to 60 minutes.
6. Touch the
button. The oven begins to heat up.
button to enter the
11
Advertisement
Table of Contents
