Is Your Vehicle Ready To Drive - Joyner Dirt Devil SZ250DS 2006 Owner's Manual And Parts Manual

Table of Contents

Advertisement

IS YOUR VEHICLE READY TO DRIVE?

Before each drive, it is important to inspect your Go-Kart and make sure any
problems you find are corrected. A pre-drive inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire, can be a major inconvenience.
If your Go-Kart has overturned or has been involved in a collision, do not drive it
until your dealer has inspected your Go-Kart, There may be damages or other problems
you cannot see.
Pre-drive Inspection
Check the following items before you get on the Go-Kart:
Engine Oil
Check the level and add oil if needed. Check for leaks.
Fuel
Check the level and add fuel if needed. Also make sure the fuel fill cap is securely
fastened. Check for leaks.
Tires
Use a gauge to check the air pressure. Adjust if needed. Also look for signs of
damages or excessive wear.
Nuts & Bolts
Check the wheels to see that the axle nuts are tightened, Use a wrench to make
sure all accessible nuts; bolts, and fasteners are tight.
Under body & Exhaust System
Check for and remove any dirt, vegetation or other debris that could be fire hazard
or interfere with the proper operation of the Go-Kart.
Air Cleaner Housing Drain Tube
Check for deposits in the drain tube. If necessary, clean the tube and check the air
cleaner housing.
Leaks, Loose Parts
Walk around you Go-Kart and look for anything that appears unusual, such as a
leak or loose cable.
Lights
Make sure the headlight, brake light and taillights are working properly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents