Advertisement
Quick Links
I N S T R U C T I O N
Plasma Swivel Stand
(PSS-2000BR/SS)
The Plasma Swivel Stand (PSS-2000) is available in black
(PSS-2000BR) or silver (PSS-2000SS) to securely mount
your large flat panel display. A stylish solution for residential,
commercial and business applications, the PSS-200 pro-
vides a wide variety of features for most table top installa-
tions.
Features include +/-45 degrees of swivel, free standing with
bolt down capability for permanent installation or security,
infinite height adjustment of 5" and two cable options for
ease of installation. The PSS-2000 swivel feature offers
optional stops at +/-15 degrees, 25 degrees or 35 degrees.
The infinite height adjustment of 5" allows for different screen
heights up to 32 inches and cables may extend from the back
of the display or be routed through an access hole in the mid-
dle of the stand.
The PSS-2000 uses Chief's exclusive Q-Latch™ Mounting
System for easy installation, stable mounting and quick
release. A video conferencing shelf, aesthetic cover kit, and
Q-clamps for added security are available.
BEFORE YOU BEGIN
• CAUTION: To prevent damage to the stand, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install or operate the unit. Pay particular atten-
tion to the "Important Precautions" on Page 1.
• The maximum weight to be installed on the PSS is 150 pounds (68.36 Kg)
• If you have any questions about this assembly, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
M A N U A L
PART NO. 8800-000039 (Rev. D)
©2004 Chief Manufacturing
www.chiefmfg.com
09-05
Advertisement
Related Manuals for Philips (PSS-2000BR/SS)
Summary of Contents for Philips (PSS-2000BR/SS)
-
Page 1: Before You Begin
I N S T R U C T I O N Plasma Swivel Stand (PSS-2000BR/SS) The Plasma Swivel Stand (PSS-2000) is available in black (PSS-2000BR) or silver (PSS-2000SS) to securely mount your large flat panel display. A stylish solution for residential, commercial and business applications, the PSS-200 pro- vides a wide variety of features for most table top installa- tions. -
Page 2: Table Of Contents
Instruction Manual IMPORTANT WARNINGS and CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions. -
Page 3: Inspect Parts Before Assembly
Instruction Manual INSPECT PARTS BEFORE ASSEMBLY Remove and Inspect the Stand 1. Open shipping container, remove unit from container, and remove wooden shipping base. 2. Carefully inspect the stand for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the assembly procedure until the carrier has reviewed the damage. -
Page 4: Display Preparation Procedures
Instruction Manual DISPLAY PREPARATION PROCEDURES Prepare the display for installation as follows: 1. Install the PSB bracket (shipped with the PSS) on your display according to the instructions included in PSB bracket package. STAND ASSEMBLY PROCEDURES Free Standing (not anchored) Applications Only: NOTE: Do not perform this step if you are going to anchor the stand to a surface. - Page 5 Instruction Manual Height Adj. Screws Nuts Holes used for displays measuring less than 30 Inches Tall Slide Nuts Figure 3. Stand Assembly Flag in down (lowered) position Figure 4. For displays Taller Than 30 Inches Front Plate Reattach front plate using these holes Swivel Stand...
-
Page 6: Display Installation Procedures
Instruction Manual DISPLAY INSTALLATION PROCEDURES Install the display as follows: 1. Make sure the latching flag of the stand is in the open (lowered) position (see Figure 4). 2. Align the mounting buttons of the PSB bracket, installed on your display, with the teardrop slots in the mounting plate of the stand. -
Page 7: Stand Anchoring Procedures
Instruction Manual STAND ANCHORING PROCEDURES NOTE: Due to the wide variety of anchoring options, hard- ware is not provided. Anchor stand follows: 1. Select a suitable location for anchoring, allowing for room for swivel and access for cabling. 2. Using the template provided, drill anchoring holes for the four 1/4-20 X 1/2”...