Internal Shading Installation - Alton Evolution Internal Shading Instruction Manual

Internal Shading Installation

To install the internal shading blinds to your Alton Evolution greenhouse you will need to
temporarily remove the ridge braces. With the braces removed you will be able to position the roller
blind parallel to the underside of the ridge (diagram 1). Fix this in place with round head screws.
Diagram 1
Diagram 3
Were a roller blind meets a gable end you will
need adjust the direction of the flange (diagram
2). Using an adjustable spanner clamp this onto
the flange with the fixing hole in and bend it
upwards. You will now be able to fix this inline
with the other blinds.
With all the blinds in place you can re-attach any
bracing you removed.
2
Diagram 2