Table of Contents
Advertisement
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
Procedure
MENU * Setup * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC
Video system used in Japan, the U.S., and other countries
PAL
Video system used in Europe and other areas
4:3
Normal TV screen aspect ratio
16:9
Wide screen aspect ratio
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera's video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Formatting Built-in Memory or a Memory Card (Format)
Procedure
MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
90
Other Settings (Set Up)
Advertisement
Table of Contents
