Table of Contents
Advertisement
3.
Connect the USB
cable to the camera.
The back lamp should
light red, indicating that
charging has started.
The back lamp will go
out when charging is
complete.
It takes about
110 minutes to bring a
fully dead battery to a
full charge.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Back Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
4.
After charging is complete, disconnect the USB cable from the camera
and then unplug the power cord from the power outlet.
Small
connector
Making sure that the
is towards the lens side, connect the cable to the camera.
Description
Charging
Abnormal ambient temperature,
USB-AC adaptor problem,
battery problem, or charging
terminated by timer (page 99)
Charging complete
16
USB-AC adaptor
[USB/AV]
port
USB cable
(included with camera)
mark on the USB cable connector
Back lamp
Quick Start Basics
Advertisement
Table of Contents
