Table of Contents
Advertisement
3.
Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
Full-press
Snap (Image is recorded.)
NOTE
• You also can shoot a snapshot by touching a point on the monitor screen (page
42).
• You can specify the image size for snapshots. See page 45 for more information.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. If the subject is not in the center of the frame...
"Focus lock" (page 44) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
Recording a Movie
Press [0] (Movie) to start
movie recording. Press
[0] (Movie) again to stop
movie recording. See
page 37 for details.
28
[
] (Movie)
0
Quick Start Basics
Advertisement
Table of Contents
