Advertisement
Quick Links
Advertisement
Related Manuals for Warner RF FMT5.0-2U Series
Summary of Contents for Warner RF FMT5.0-2U Series
- Page 1 Warner RF FMT5.0-2U Series Transmitter Manual...
-
Page 2: Table Of Contents
目录 Preparatory work:..............................3 Transmitter operation interface..........................4 1. Startup and system loading.........................4 2. Main interface and setting.........................4 3. Alarm information............................11 Routine maintenance of transmitter........................12 A letter from the manufacturer..........................12... -
Page 3: Preparatory Work
Preparatory work: Please first erect the antenna feeder and connect it to the RFOUT port of the transmitter. To detect the equipment index, please connect to an attenuator whose output power is larger than the transmitter’s output power and the total attenuation value is greater than 60DB. -
Page 4: Transmitter Operation Interface
Transmitter operation interface 1. Startup and system loading 2. Main interface and setting Current frequency Menu setting This shows the audio mode, UV table for audio level L and R channels, and modulation level table M Modulation mode... - Page 5 Audio ore-emphasis RTC clock System setting menu Press MENU to enter system setting, six default passwords is required (password: 000008) Type password to enter the system menu System setting interface Frequency setting Forward power setting Audio signal and modulation setting...
- Page 6 Frequency setting Manually set frequency Test antenna VSWR Manually set frequency Set as minimum frequency of 87.50MHz Set as maximum frequency of 108.00MHz Speed up the frequency to move left Speed up the frequency to move right Confirm Test antenna VSWR Attentions before testing antenna VSWR...
- Page 7 The automatic test antenna VSWR is stepped from 88-108MHz every 1MHz and tested at 25% power. V.S.W.R less than 1. 4 is acceptable, and less than 1.1 is the best. after scanning, press FREQ set to enter the manually set frequency. Forward power setting Power adjustment with 1W step...
- Page 8 Audio channel setting Stereo mode Mono mode Mono mode for left channel input Mono mode for right channel input Mute audio input signal Audio level setting Press the key to adjust the amplitude of the audio level and adjust the audio input signal to about 100% of the UV table display of L and R.
- Page 9 Modulation mode setting Internal stereo or mono audio input modulation Internal stereo or mono audio input modulation Internal stereo or mono audio input & external SCA or RDS signal input modulation Signal level setting for SCA and RDS Press the key to adjust the signal level of SCA or System information setting Model...
- Page 10 History alarm information record Store up to 9 alarm records, including its type and status Turn the page forward and backward and clear the alarm record RTC clock setting Please set the local time when first using it Password setting Disable menu password lock Change default password...
-
Page 11: Alarm Information
3. Alarm information V.S.W.R high! Alarm The transmitter self-safety protection is activated due to the high return power of the antenna or cable. The power will be turned off and please check the condition of antenna and cable Overheat! Alarm Because the room temperature is too high or the ventilation system is blocked by too much dust inside the transmitter, resulting in high... -
Page 12: Routine Maintenance Of Transmitter
50CM. A letter from the manufacturer Thank you for choosing the equipment produced by Warner RF Electronic Device co., ltd. We established our business in China since 2008 and have been committed to providing users with the most cost-effective and humanized products in the broadcast transmitter industry.