Related Manuals for Warner RF FMT3-150A
Summary of Contents for Warner RF FMT3-150A
- Page 1 FM Transmitter Operation Manual FMT3-150A FMT3-350H FMT3-600H FMT3-1000H Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
- Page 2 This manual provides important guidelines for installing. Review this information carefully for proper installation. IMPORTANT Maintenance can only be operated by authorized professionals. Get lightening protection measures ready in thunderstorm weather. Do not touch the antenna when the transmitter is powered on. Do not power on the transmitter if the antenna is not well connected.
- Page 3 Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
- Page 4 Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
- Page 5 About Us. FEATURE FMT 3.0 series product includes FMT3-150A, FMT3-350H, FMT3-600H and FMT3-1000H, which its max power is 150W, 350W, 600W and 1000W. Each of the product possesses of multiple functions, reliable and steady performance, fast operations and well-structured in heat dissipation.
-
Page 6: General Illustration
GENERAL ILLUSTRATION 1. Illustration of front panel 2. Illustration of back pane Back panel of FMT3-150A Back panel of FMT3-350H/600H Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products. - Page 7 OPERATING INSTRUCTIONS IMPORTANT Be sure the antenna or dummy load is well connected before turning on the transmitter. Power Switch, to turn ON/OFF Switch the button to ‘I’ to turn on the transmitter, and ‘O’ to turn off the transmitter. After the antenna or dummy load is connected, switch the power button to ‘I’...
- Page 8 1: Frequency 87.5-108MHz 2: RF output power 3: Drive level state 4: Input level dynamic indicator. (audio or composite signal) 5: Internal modulation or external modulation 6: Modulation level gain. 7: Stereo mode. 8: Audio level gain. 9: Pre-emphasis 0us, 50us, 75us 10: Amplifier unit temperature.
- Page 9 There are four options in this menu. (1) Frequency setup Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
- Page 10 MANUAL is to set the frequency directly. MATCH is to scan the frequency, find the best match frequency for antenna system. In the manual mode, you may set the frequency by below buttons, +1 : increase 1MHz. +0.5 : increase 0.5MHz. -1 : reduce 1MHz.
- Page 11 (2) RF Power setup The power can be set by below buttons, +10 : increase 10 watts. +1: increase 1 watt. -10: reduce 10 watts. -1: reduce 1 watt. MIN: set at 0 Watt MAX: set at the rated power level. OK: confirm the RF power that you set and exit.
- Page 12 Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
- Page 13 (4) System setup TIME: set the realtime PWD: set the password or enable/disable the password. PREV: Look over the previous fault record. Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
- Page 14 NEXT : Look over the next fault record. DELETE : Delete fault record. Revised by BG7CR on Feb-2018. Any question please send email to littleshirely@gmail.com Please visit our website http://www.108MHz.com for more products.
-
Page 15: Technical Specifications
TECHNICAL SPECIFICATIONS Power step: 1 watt (30W, step 0.1 watt) Frequency Range: 87.5MHz to 108MHz Frequency step: 100 KHz Modulation mode: Tuning Design: Stable PLL Technology Frequency deviation: < ±75KHz Harmonic: More than 65dB ...