Using The Remote Control - Philips DVP6600 User Manual

Remote Control

Using the remote control

A
Open the battery compartment.
B
Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C
Close the cover.
D
Point the remote control directly at the
remote sensor (IR) on the front panel.
DISC
MENU
RETURN
TITLE
PREV
Note:
Never place any objects between the
remote control and this unit while
operating.
E
Select the desired function (for example
u).
12
1_dvp6600_98_eng12_Final2.indd 12 1_dvp6600_98_eng12_Final2.indd 12
(continued)
DISPLAY
SETUP
NEXT
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Never mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances; they should be disposed
of properly.
2007-08-15 4:34:43 PM 2007-08-15 4:34:43 PM