Trivet Installation - Electrolux EVEP916 Installation Manual

Kickpanel installation
Installing the clip-on kick panel
Selected models are supplied with a clip-on kick panel that can be
assembled to clip onto the front feet for a more integrated and seamless
kitchen appearance.
Assemble the clip snap onto the base.
Press in both assembled clip modules into the
kick panel in the orientation as shown below.
Make sure both clip modules are in the same orientation after
installation.
Clip the kick panel onto the front feet of the appliance. Make sure the
kick panel snaps onto the larger section of the front feet.

Trivet installation

Installing the trivets
Position the 2 side trivets onto the hob first, ensuring the 2 corner
location recesses are to the back of the hob.
Position the middle trivet ensuring the trivet fingers are aligned with the
side trivet fingers.
The wok support sits on top of the trivet above the wok burner.
Side trivet
1
Wok support
2
Middle trivet
3
Side trivet
4
1 2 3 4
5