6.8. RFID
The RFID section on the web UI allows to change the connection settings to the internal RFID NUR
module and all the RFID parameters of the reader:
•
Q: auto, 1, 2 ... 15
•
Rounds: auto, 1, 2 .... 10
•
Session: 0, 1, 2, 3
•
Target: A, B, dual
•
Tx level: 1dBm / 1mW - 30dBm / 1000mW (30 steps of 1dBm)
•
RX Sensitivity: nominal, low, high
•
RF Profile: nominal, robust, high speed (see section 3)
•
Power saving mode: off, 100ms, 500ms, 1000ms (see section 4)
•
Active antennas
•
Selected antenna: auto or specific antenna
•
RSSI filters: min / max for read / write / inventory
•
Timeouts for different commands (read, write, kill, lock)
•
Channel hopping event: enabled or disabled
Report Zero Count Inventory: enabled or disabled
•
Nordic ID Group
| Joensuunkatu 7 | FI-24100 Salo |Finland
Office +358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com
Screenshot 15 RFID settings screen
32 / 40
2022-04-04
Nordic ID FR22 User Guide
Version 1.0