Powering The Reader; Led Indicators - Nordic ID FR22 User Manual

2.4. POWERING THE READER

Nordic ID FR22 can be powered via DC ethernet port if the network supports power over Ethernet (PoE)
feature or using a PoE+ power supply (sold separately).
Regardless of what powering method is used, the data communication can be handled via USB connection
or Bluetooth, or if IP connectivity is required then via WWAN, WLAN or ethernet.
Nordic ID FR22 powers up automatically when connected to PoE power supply or network.
The rated maximum power consumption for Nordic ID FR22 reader is:
•
25.5W with maximum RFID transmission level and all the radios (WLAN, Bluetooth and LTE)
enabled.
• 18W with maximum RFID transmission level and all the radios disabled (communication via
Ethernet or USB).
• 4W in idle state, with RFID and all the radios disabled.

2.5. LED INDICATORS

The user interface of Nordic ID FR22 consists of 9 LED indicators:
•
4 LEDs for user indications
Power LED
o
Connection LED
o
Application LED
o
RFID LED
o
• 4 LEDs to indicate the antenna ports status,
• 1 LED for the Nordic ID Extension Port.
The location of the LEDs can be seen in Picture 12.
Nordic ID Group | Joensuunkatu 7 | FI-24100 Salo |Finland
Office +358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com
Picture 12 Location of LEDs
14 / 40
2022-04-04
Nordic ID FR22 User Guide
Version 1.0