Sony VAIO CDP-220AS Service Manual page 8

2.
Press the > +/– buttons to adjust the picture contrast.
+ for more contrast
– for less contrast
The VOLUME/CONTRAST OSD disappears 3 seconds after you release the
buttons.
Adjusting the picture brightness
The adjustment data becomes the common setting for all input signals.
1.
Press the button.
The BRIGHTNESS/GPE OSD appears.
2.
Press the . +/– buttons to adjust the picture brightness.
+ for more brightness
– for less brightness
To exit the OSD
Press the button again.
Tip
If you don't touch any buttons the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
Adjustments
18 GB
Adjusting the picture size
The adjustment data becomes the individual setting for each input signal
received.
1.
Press the Å button.
The SIZE OSD appears.
2.
For vertical adjustment For horizontal adjustment
Press the . +/– buttons. Press the > +/– buttons.
+ to increase + to increase
– to decrease – to decrease
To exit the OSD
Press the Å button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
GB Adjustments
20
All manuals and user guides at all-guides.com
Adjusting the picture centering
The adjustment data becomes the individual setting for each input signal
received.
1.
2.
To exit the OSD
Press the S button again.
Adjusting the picture rotation
The adjustment data becomes the common setting for all input signals.
1.
2.
To exit the OSD
Press the d button again.
– 8 –
Press the S button.
The CENTER OSD appears.
For vertical adjustment For horizontal adjustment
Press the . +/– buttons. Press the > +/– buttons.
+ to move up + to move right
– to move down – to move left
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
Press the d button.
The GEOMETRY OSD appears.
Press the . +/– buttons.
+ to rotate clockwise
– to rotate counterclockwise
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
Adjustments 19 GB
Adjustments 21 GB