Interacoustics Affinity Compact Instructions For Use Manual page 79

Guidance and manufacturer's declaration - electromagnetic emissions
The AFFINITY COMPACT is intended for use in the electromagnetic environment specified below.
The customer or the user of the AFFINITY COMPACT should assure that it is used in such an
environment.
Emissions Test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage f luctuations /
f licker emissions
IEC 61000-3-3
Recommended separation distances between portable and mobile RF communications equipment
and the AFFINITY COMPACT.
The AFFINITY COMPACT is intended f or use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the AFFINITY COMPACT can help prevent
electromagnetic interf erences by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the AFFINITY COMPACT as recommended below,
according to the maximum output power of the communications equipment.
Rated Maximum
output power of
transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d in meters (m) can be estimated using the equation applicable to the f requency of the transmitter, where
P is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manuf acturer.
Note 1 At 80 MHz and 800 MHZ, the higher f requency range applies.
Note 2 These guidelines may not apply to all situations. Electromagnetic propagation is af f ected by
absorption and ref lection f rom structures, objects and people.
D-0123672-H – 2022/05
Affinity Compact - Instructions for Use - US
Compliance
Group 1
Class B
Complies
Class A Category
Complies
Separation distance according to frequency of transmitter
[m]
150 kHz to 80 MHz
d = 1.17√P
0.12
0.37
1.17
3.70
11.70
Electromagnetic environment - guidance
The AFFINITY COMPACT uses RF energy only f or its
internal f unction.
Theref ore, its RF emissions are very low and are not
likely to cause any interf erence in nearby electronic
equipment.
The AFFINITY COMPACT is suitable f or use in all
commercial, industrial, business, and residential
environments.
80 MHz to 800 MHz
d = 1.17√P
0.12
0.37
1.17
3.70
11.70
800 MHz to 2.7 GHz
d = 2.23√P
0.23
0.74
2.33
7.37
23.30
Page 75