Table of Contents
Advertisement
Product Information
file:///G|/TEMP/PHILIPS/190S9 EDFU/lcd/manual/ENGLISH/190S9/product/product.htm（第 7／9 页）2008-5-24 9:54:14
Physical Specifications
• Tilt
-5°+2/-0 ~+ 20°+3/-0
• Power supply
100 ~ 240 VAC, 50/60 Hz
• Power consumption
36W* (typ.)
0° C to 40 ° C (operating)
• Temperature
-20° C to 60° C (storage)
• Relative humidity
20% to 80%
• System MTBF
50K hours (CCFL 40K hours)
* This data is subject to change without notice.
1280 x 1024, standard size, contrast 50%, brightness max., 6500° K, full white pattern.
Pin Assignment
1.The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table:
Pin No. Signal Assignment
1
T.M.D.S. Data2-
2
T.M.D.S. Data2+
3
T.M.D.S. Data2/4 Shield
4
No connect
5
No connect
6
DDC Clock
7
DDC Data
8
No connect
RETURN TO TOP OF THE PAGE
Pin No. Signal Assignment
9
T.M.D.S. Data1-
10
T.M.D.S. Data1+
11
T.M.D.S. Data1/3 Shield
12
No connect
13
No connect
14
+5V Power
15
Ground (for +5V)
Hot Plug Detect
16
Pin No. Signal Assignment
17
T.M.D.S. Data0-
18
T.M.D.S. Data0+
19
T.M.D.S. Data0/5 Shield
20
No connect
21
No connect
T.M.D.S. Clock Shield
22
23
T.M.D.S. Clock+
T.M.D.S. Clock-
24
Advertisement
Table of Contents
Troubleshooting
