Physical Specifications; Pin Assignment - Philips 190SW9F User Manual

Product Information
file:///H|/OEM MODELS/Philips 2008/CD MANUAL/190SW9 EDFU/190SW9 EDFU/lcd/manual/ENGLISH/190S9/product/product.htm 第 8 頁 / 共 10 [2008/5/29 上午 11:35:43]

Physical Specifications

Tilt -5°+2/-0 ~+ 20°+3/-0
100 ~ 240 VAC, 50/60 Hz
Power supply
36W* (typ.)
Power consumption
0° C to 40 ° C (operating)
Temperature
-20° C to 60° C (storage)
20% to 80%
Relative humidity
System MTBF 50K hours (CCFL 40K hours)
* This data is subject to change without notice.
1440 x 900, standard size, contrast 50%, brightness max., 6500° K, full white pattern.

Pin Assignment

1.The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments
are listed in the following table:
Pin
Signal Assignment
No.
1
T.M.D.S. Data2-
2 T.M.D.S. Data2+
3 T.M.D.S. Data2/4 Shield
4 No connect
5 No connect
6 DDC Clock
7 DDC Data
8 No connect
RETURN TO TOP OF THE PAGE
Pin
Signal Assignment
No.
9 T.M.D.S. Data1-
10 T.M.D.S. Data1+
11 T.M.D.S. Data1/3 Shield
12 No connect
13 No connect
14 +5V Power
15 Ground (for +5V)
Hot Plug Detect
16
Pin
Signal Assignment
No.
T.M.D.S. Data0-
17
T.M.D.S. Data0+
18
T.M.D.S. Data0/5 Shield
19
No connect
20
No connect
21
T.M.D.S. Clock Shield
22
T.M.D.S. Clock+
23
T.M.D.S. Clock-
24