Table of Contents
Advertisement
■
Disconnect the camera from the computer
Windows Vista/XP/98SE/98 Users
Press the camera's [ON/OFF] button. After making sure that the
camera's operation lamp is not lit green, disconnect the camera
from the computer.
Windows 2000/Me Users
Click card services in the task tray on your computer screen, and
disable the drive number assigned to the camera. Next,
disconnect the USB cable from the camera, and then turn off the
camera.
Transfer of Images from the Camera and
Management of Images on the Computer
To manage images on your computer, you need to install the
Photo Loader with HOT ALBUM application from the CD-ROM
that comes with the camera.
Photo Loader with HOT ALBUM lets you import images from the
camera to your computer automatically, to arrange images by
recording date, and to display images in a calendar format.
■
Installing Photo Loader with HOT ALBUM
1.
Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the "MENU.exe" file.
2.
On the menu screen, click the "Language"
down arrow button and then select the
language you want.
3.
Click "Photo Loader with HOT ALBUM 3.1" to
select it and then click "Read me."
• "Read me" files contain important information about
installation, including installation conditions and computer
system requirements.
USING THE CAMERA WITH A COMPUTER
192
Advertisement
Table of Contents
