Casio Exilim EX-Z60 User Manual page 203

VIEWING IMAGES ON A COMPUTER
6.
Turn on the camera.
• This will cause your computer to create a hardware
profile for camera's built-in memory or the memory
card loaded in the camera. You do not need to install
the USB driver every time. After you install it once,
your computer will recognize the camera's built-in
memory or its memory card when you establish a
USB connection between the camera and your
computer.
• This will cause the
camera's operation lamp to
light green.
• At this point, some
operating systems will
display a "Removable Disk"
dialog box. If your operating
system does, close the
dialog box.
Operation lamp
203
G EX-Z60DX
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.