Sony SRS-XE300 Help Manual page 46

Hide thumbs Also See for SRS-XE300:

Table of Contents

Help Guide

Wireless Speaker

SRS-XE300

Listening to music wirelessly with 2 speakers (Stereo Pair function)

To use the Stereo Pair function, 2 SRS-XE300 speakers are required. By connecting 2 speakers via BLUETOOTH

connection, you can enjoy more powerful sound.

One speaker connected via a BLUETOOTH connection plays the sound on the left channel (left side) and the other

speaker connected via another BLUETOOTH connection plays the sound on the right channel (right side) to provide

stereo playback.

Before operating the speaker, make sure of the following:

Update the pre-installed software to the latest version on each and every speaker to connect for the function.

(For details about the update procedure, see

Make sure that the 2 speakers to connect for the function are located within 1 m (3.2 ft) from each other.

Stop music playback if it is in progress.

You can establish or disconnect a connection for the Stereo Pair function with "Sony | Music Center."

For details about "Sony | Music Center," refer to the following URL:

https://www.sony.net/smcqa/

Hint

When using the Stereo Pair function, the codec automatically switches to SBC.

Turning off the speaker does not terminate the Stereo Pair function. When the speaker is turned back on, it attempts to establish

a connection for the Stereo Pair function. To use the Stereo Pair function, turn on the other speaker within 1 minute. When the

BLUETOOTH standby function remains active on both of the speakers, however, turning on either of the speakers automatically

turns on the other and establish a connection for the Stereo Pair function.

Note

Before establishing a connection between the speaker and a BLUETOOTH device, turn down the volume of the speaker and the

device or stop music playback on the device to avoid any sudden loud sound output from the speaker.