Table of Contents
Advertisement
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
speaker.
2.
Tap [Music Center] on your smartphone, etc. to start up the application.
Music Center
3.
Tap [SRS-XE300].
4.
Tap [Settings] - [Sound] - [Bluetooth Connection Quality], and then select [Priority on Sound Quality] or [Priority
on Stable Connection].
5.
Disconnect the connection with the BLUETOOTH device and then establish it once again.
The new setup is applied.
Hint
When using the Stereo Pair function or the Party Connect function, the codec automatically switches to SBC.
Note
While the "Priority on Sound Quality" preference is selected, noise or sound interruption may occur depending on the setting of
your BLUETOOTH device and ambient conditions. In such a case, change the BLUETOOTH connection quality to the "Priority on
Stable Connection" preference.
Related Topic
Using the BLUETOOTH standby (auto power on) function
Switching between monaural audio playback and stereo audio playback
What you can do with "Sony | Music Center"
5-038-100-11(1) Copyright 2022 Sony Corporation
44
Advertisement
Table of Contents
