Configuration Setting; Headset Configuration Setting; Delete All Pairings; Device Settings - Cellularline U-COM 3 User Manual

3 sec

9. CONFIGURATION SETTING

9.1 Headset Configuration Setting

With U-COM 3 on, press and hold central button for 10 seconds, to enter
Anycom pairing for other brands (except Sena)
settings menu. Don't release the button until the led light is blue.
Intercom Confi guration Anycom
menu pairing
pairing
10 sec
To navigate through the settings, press once the MUSIC button or the
PHONE button.
Setup
1. Phone pairing
2. Second Mobile Phone Pairing
3. Phone selective pairing (pair a device with HFP profile only)
4. Media selective pairing (pair a device with the A2DP profile only)
5. GPS pairing
To confirm the following configuration menu options, press the CENTER
button once.

6. Delete all pairings

7. Anycom pairing
8. Factory reset
9. Exit
9.1.1 Delete all pairings
Delete all Bluetooth pairings stored in the device.
®
6 sec
Mobile phone
pairing
?
x 3
Mesh Bluetooth
Interphone U-Com 16 (Utente) Aggiungi utente
Aggiungi utente Aggiungi utente
Fine intercom

9.2 Device settings

You can change the device settings from the Device Manager utility
(available for PC and MAC on www.interphone.com) or from the Interphone
UNITE app.
Attention: the setting "Advanced Features" will enable the following
headeset features:
• Phone multiple speed dial

9.2.1 Speed dial

Assign phone numbers for speed dialing to make a phone call quickly.

9.2.2 Unit Language

You can select the device language. The selected language is maintained
even when the headset is rebooted

9.2.3 Audio Equalizer (Default: Off)

You can use the Audio Equalizer to increase/decrease the decibel level of
different frequency ranges of audio.
• Balance will adjust all of the frequency ranges to be the same volume
level (0 dB).
• Bass Boost will increase the bass range of audio (20 Hz - 250 Hz).
• Mid Boost will increase the mid range of audio (250 Hz - 4 kHz).
• Treble Boost will increase the high range of audio (4 kHz - 20 kHz).

9.2.4 VOX Phone (Default: Enable)

If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone by
saying a word such as "Hello" loudly or by blowing air into the microphone.
VOX phone is temporarily disabled if you are connected to intercom. If this
feature is disabled, you have to tap the Center Button to answer an incoming
call.
11