Old Interphone Series; Anycom; Function Priority And Firmware Upgrades; Function Priority - Cellularline U-COM 3 User Manual

7.3 Old Interphone Series

luetooth Intercom - other pairings
®
It is possible to pair previous Interphone series devices by pressing, with the
unit on, the INTERCOM and TELEPHONE buttons for 5 seconds. Then start
atching previous series. To be done with unit on on u-com 3 and with the unit off on the other
pairing mode on the second unit, usually pressing the power button (with
Bluetooth Intercom - other pairings
®
device (consult the manual of the other device for more details)
the control unit off) until the led flashes red/blue.
Matching previous series. To be done with unit on on u-com 3 and with the unit off on the other
device (consult the manual of the other device for more details)
Interphone
pairing
Interphone
pairing
3 sec

7.4 Anycom

3 sec
Anycom feature allows intercom conversations with other intercom brands.
Anycom pairing for other brands (except Sena)
It is possible to pair the intercom with only one non-Interphone device at a
time. The intercom distance depends on the performance of the connected
Bluetooth intercom. When a not-Interphone device is paired with the
®
Anycom pairing for other brands (except Sena)
Interphone device, if another Bluetooth
Confi guration Anycom
rcom
ring menu pairing
mobile phone pairing, it will be disconnected.
Confi guration
Intercom
pairing menu
10 sec
10 sec
etup
1. With U-COM 3 on, enter the configuration menu by pressing the central
button for 10 seconds. Do not to release the button before the led turns
Setup
blue.
2. Press the PHONE button 3 times to activate the ANYCOM pairing mode.
3. Set the not-Interphone intercom to mode Phone pairing.
10
6 sec
Mobile phone
device is paired via the second
®
pairing
Mobile phone
Anycom
pairing
pairing ?
x 3
x 3
Mesh Bluetooth
Interphone U-Com 16 (Utente) Aggiungi utente
Mesh Bluetooth
Aggiungi utente Aggiungi utente
Fine intercom
Interphone U-Com 16 (Utente) Aggiungi utente
Aggiungi utente Aggiungi utente
Fine intercom
8. FUNCTION PRIORITY AND FIRMWARE
UPGRADES

8.1 Function Priority

Intercom prioritizes connected devices in the following order:
1. (highest) Phone
2. Bluetooth
3. (lowest) Bluetooth
A low priority function will be interrupted by a higher priority function. For
example, stereo music will be interrupted by an intercom conversation; an
intercom conversation will be interrupted by an incoming cell phone call.
You can reverse the priority of Intercom and Music, via APP smartphone
6 sec
or device manager for PC/MAC.

8.2 Firmware Upgrades

The headset supports firmware upgrades. Using the Device Manager utility
(available for PC and MAC on www.interphone.com) you can upgrade
firmware.
The USB Power & Data Cable (USB-C) must be connected to your computer,
then start Device Manager on computer and follow instructions step by step.
Interphone Unite APP can check the firmware version present on the
headset and inform you in case of a newer available firmware, but APP can't
flash the new firmware to headset.
?
Intercom
®
stereo music
®