1. ABOUT 1.2 Package contents Product details 1.1 Product details Right speaker 2 way connector Status led Intercom DC Power Charging & Firmware Upgrade Port Phone & Volume – Music & Volume + Left speaker 2 way connector Microphone 2 way connector Wired microphone for fullface helmet Battery 3 way...
2. HOW TO INSTALL Installing the speakers and the microphone Installation 2.1 Install main unit Using the hook and loop fasteners for main unit Using the double sided adhesive tapes for main unit Using the clamp for main unit...
Legenda and basic functions Press three Press and hold Press and hold Press and hold Press once Press twice times for 1 sec for 5 sec for 10 sec Legenda and basic functions 3. GETTING STARTED 4. PAIRING WITH OTHER BLUETOOTH DEVICES ®...
Confi guration Phone Intercom UCOM4 pairing menu pairing UCOM16 Bluetooth 10 sec UCOM4 UCOM16 4.3 GPS Pairing Multimedia TFT system of motorcycle must be paired with “PHONE PAIRING”: 1. Switch on Bluetooth service on your GPS (check device manual for more UCOM16 UCOM4 ®...
4.4 Advanced Selective Pairing: Hands-Free or A2DP Stereo 5.2 Siri and Google Assistant Phone Pairing allows the headset to establish two Bluetooth profiles: U-COM 4 supports the Siri and Google Assistant access directly. You can ® Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the headset activate the Siri or Google Assistant using the voice through the headset’s to separate the profiles to enable connection with two devices.
® MP3 players, Motorcycle TFTs etc ...) equipped with the A2DP profile. To Last number redial Music and FM radio play music you need to pair these devices to INTERPHONE U-COM 4. Speed dial #1 Speed dial #2 Music play...
7. BLUETOOTH INTERCOM ® 2. Repeat the previous step again, pressing the center button (intercom) on the two units A and C for 5 seconds until you hear the voice prompt “Intercom pairing”. 7.1 Intercom pairing U-COM 4 can be paired with up to 3 other UCOM units (or Sena units), as shown in the following picture.
7.2 Two-way Intercom Conversation 7.3 Multi-user Intercom Conference After pairing the control units, communication can be started, by pressing Conference conversations can be activated with up to three other units at the INTERCOM button (center button), according to the diagram below. the same time.
7.4 Three-Way Conference Phone Call with Intercom Users 3. Then (A) can call (C), or (C) can join the conversation by making an intercom call to (A). (with “Advanced Features” activated by APP or Device Manager) You can have a three-way Conference-Phone Call by adding an intercom user to the mobile phone conversation.
To disconnect the mobile phone call during a conference phone call, press 3. When all of the headsets are connected together, everyone will hear a and hold the Center Button for 2 seconds. voice prompt, “Group intercom connected”. Note: When you have an incoming intercom call during a mobile phone call, 4.
Music and FM radio Music play Music pause Next track Previous track 8. FM RADIO Press MUSIC button for one second to save station. 8.1 FM Radio features Press MUSIC button for 3 seconds to switch ON/OFF the FM RADIO. 1 sec 2 sec 1 sec...
6 sec 9. FUNCTION PRIORITY AND FIRMWARE 10. CONFIGURATION SETTING UPGRADES 5 sec 10.1 Headset Configuration Setting 9.1 Function Priority With U-COM 4 on, press and hold central button for 10 seconds, to enter Anycom pairing for other brands (except Sena) settings menu.
10.2 Device settings 10.2.5 VOX Intercom (Default: Disable) You can change the device settings from the Device Manager utility If VOX Intercom is enabled, you can initiate an intercom conversation with (available for PC and MAC on www.interphone.com) or from the Interphone the last connected intercom by voice.
Page 17
10.2.8 Intercom-Audio Overlay Sensitivity (Default: 3) 10.2.12 Smart Volume Control (Default: Disable) The music, FM radio and GPS volume will be lowered to play in the Enabling Smart Volume Control automatically changes the level of the background if you talk over the intercom while the overlaid audio is speakers volume based on the level of the environment noise.
Page 18
Other Interphone series pairing (to be done with unit OFF) 11. TROUBLESHOOTING Interphone pairing Please visit www.interphone.com for video tutorials and answers to frequently asked questions. 11.1 Fault reset When the intercom does not work properly, it is possible to reset the unit 6 sec easily, simply by disconnecting the battery for few seconds.
Need help?
Do you have a question about the INTERPHONE U-COM 4 and is the answer not in the manual?
Questions and answers