Advertisement
Quick Links
Place these instructions in the vehicle's glove box after installation is complete.
Please read these instructions carefully prior to installation.
Important:
Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
Check the contents of this kit before commencing fitment and report any discrepancies.
Parts List
Item
Component Name
1
Skewer Shaft
2
Clamp Housing Assembly
3
Lock Plate
4
Lever Assembly
5
Dowel Nut
6
Key
7
Instruction Manual
Care Instruction:
Thoroughly clean vehicle roof racks and/or bicycle carrier
prior to fitting the Rhino Key Locking Skewer.
Tools Required
No tools are required for installation of this item.
Remove existing skewer assembly
When upgrading a previously purchased bicycle
carrier you will first need to remove the existing
skewer prior to installing your Key Locking Skewer.
Bicycle carrier after removal
of standard skewer.
RKLS Key Locking Skewer
Qty
Part No.
1
B151
1
M291A
1
M274
1
M273A
1
N044
1
n/a
1
RS-277
Locking Skewer (as packaged)
Disassembled Components
3
4
Step 1: Unscrew and
remove adjustment nut
1
2
5
6
Step 2: Remove skewer
from bicycle carrier.
Page 1 of 5
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rhino-Rack RKLS
Summary of Contents for Rhino-Rack RKLS
- Page 1 RKLS Key Locking Skewer Place these instructions in the vehicle’s glove box after installation is complete. Please read these instructions carefully prior to installation. Important: Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
- Page 2 Lever Disassemble Locking Skewer: Insert key into lock and turn anti-clockwise to unlock, Lock Plate then remove key from lock. Release Lever to the position shown in image at right. Clamp Housing Assembly Whilst holding onto the skewer shaft, rotate the Lever in an anti-clockwise direction until the lever is completely removed from the skewer shaft.
- Page 3 Locking Skewer Adjustment Adjusting your skewer: Option 2 There are two ways in which you can adjust your Lever skewer. With your bicycle in place, hold Lever in one hand and with the other hand do either of the following. Option 1: Rotate the Skewer Shaft Head in a clockwise direction to tighten, anti-clockwise to loosen (or) Option 1...
- Page 4 Lock Skewer: Insert key supplied into lock and turn key clockwise as indicated, remove key from skewer. Note: It is very important that the skewer remains locked at all times when in use. Release Locking Skewer Unlock Skewer: Insert key supplied into lock and turn key anti-clockwise as indicated, remove key from skewer.
- Page 5 However, increasing the number of crossbars does not increase the vehicles maximum permissible roof loading. Note for Dealers and Fitters It is your responsibility to ensure instructions are given to the end user or client Rhino-Rack 3 Pike Street, Rydalmere, NSW 2116, Australia. Document No: RS-277...
Need help?
Do you have a question about the RKLS and is the answer not in the manual?
Questions and answers