Related Manuals for Velcom DAISY
Summary of Contents for Velcom DAISY
- Page 1 TECHNICAL MANUAL DAISY Made of 1”x1” Galvanized Steel Pipe Covered with High Density UV Polycarbonate Set of product Width 8.3ft (2.53m) • Height 7.2ft (2.2m) Length of base 13ft (4m) • Optional Extension 6.5ft (2m) etc.
- Page 2 TECHNICAL CERTIFICATE of GREENHOUSE “DAISY” DISCRIPTION The greenhouse “DAISY” is designed to create the climate, which is productive to grow horticultural crops on the garden plots. The length of the greenhouse is 13’ (4m) width is 8.3’ (2.53m) and height is 7.2’ (2.2m) with ability to extend length by 6.5’...
-
Page 3: List Of Accessories
1. LIST OF ACCESSORIES Image INSERT BASE Part name (could be different +6.5’L 13’L (optional) from the actual configuration) End rafter left, 1400mm End rafter right, 1400mm End post, side, 1600mm End crosspiece, lower side, 810mm End crosspiece, lower central 910mm (with X-crimping) End crosspiece, lower side, 810mm... - Page 4 Image INSERT BASE Part name (could be different +6.5’L 13’L (optional) from the actual configuration) Connecting stringer starter, 2012mm Connecting stringer With X-crimping, 2068mm Side diagonal support, 600mm Outside corner roof molding, 120° / 2025mm Outside corner molding, 90° / 1600mm Outside roof/side drip molding, 120°...
- Page 5 2. ASSEMBLY DIAGRAM “DAISY” PRODUCT Fig.1 Ends “A”,“B” Fig.2 Intermediate arch "E" Fig.3 Assembling frame (side view) Fig.4 Doors "C", "D" 3. Assembling Ends "A" and "B" (identically the same). Fig.1 Attention! Places of fastening parts are indented and circled with a marker.
- Page 6 3.1. Connect the left # 1 and right # 2 end rafters with # 45 (16mm) self-tapping screws. 3.2. Attach the side posts # 3 to the end rafters with # 45 self-tapping screws. 3.2 Attach the # 7 left and # 8 right doorway posts to the rafters with # 45 self- tapping screws on both sides.
- Page 7 3.5. Install upper crosspiece # 10 between posts # 7-8 at 1950 mm from the lower crosspiece and fasten with self-tapping screws # 45: 3.6. Install side crosspiece #11 between the doorway posts #7-8 and side post #3, at 860 mm from the lower crosspiece and fasten with self- tapping screws # 45: 3.7.
- Page 8 3.9. Using the details # 15-16-17-18-19, assemble with self-tapping screws # 45 the top door "C" and the lower door "D". Right post 16 on door "C","D", 960mm (with hinge holes) must be right, and # 17(18) with hole for handle must be left. Hole for the handle in the top door "C"...
- Page 9 4. Assembling intermediate arches Fig.2 Assemble the intermediate arches “E” using # 20-21 rafters, # 22 posts, # 23 braces using # 45 self-tapping screws. maintain correct geometry of the arches, use assembled template, placing the parts for assembling the arch on it. 5.
- Page 10 5.7. Connect the Anchor grouser # 25 (150mm) with Anchor post # 24 (250mm) using self-tapping screws # 45 so that you get T-shaped Anchor-legs. 5.8. Insert the Anchor-legs into the side post from below until it stops, fix with two self-tapping screws # 45.
- Page 11 6.1. Cut a sheet of CP with a size of 6000x2100mm into parts according to the diagram. 6.2. Attach part “B” to the end door, aligning the bottom edge of the CP with the bottom lintel of the end. Fix the CP with self-tapping screws #46 (19mm) through thermal washers #47 according to the scheme for attaching polycarbonate to the ends (Ext.).
- Page 12 The scheme of fixing cellular polycarbonate and a hook to the ends and doors 6.8. Attach the hook # 49 with self-tapping screws # 45 to the right-hand web of the end, and the mating loop of the hook on the upper lintel of the lower door so that the door can be hooked in the open position.
- Page 13 7. INSTALLATION OF CELLULAR POLYCARBONATE (CP) ON SIDE WALLS Cut a sheet (if necessary) of CP with a size of 6000x2100mm into parts according to the scheme For wall mounting, Use parts “E” with dimensions of 1050x1600mm are used. 7.1. Start installation of CP sheets from the ends. Attach the Polycarbonate sheet to the wall of the frame.
- Page 14 7.3. In the same way, overlap the remaining side panels of the CP with the previous ones. Mount the sheets on the opposite wall. 7.4. Bend the outer part of the #31 drip angle slightly along its entire length so that the corner can be put on the top of the CP sheet.
- Page 15 9. INSTALLATION OF EXTERNAL CORNERS 9.1. Place corners #29 on the roof ridge and secure with self-tapping screws. #46: 9.2. Mount four end corners #30 (90 °, 100mm) using self-tapping screws #46 (19mm) on the vertical corners of the frame, 6 self-tapping screws per corner, closing the corner joints of the polycarbonate sheets: 9.3.
- Page 16 10. INSTALLATION OF THE GREENHOUSE 10.1. Before starting work, you should carefully level the site on which the greenhouse will be installed. 10.2. Dig holes or trenches sufficient in length and width under the lugs. 10.3. Set up the assembled greenhouse so that the lower end lintels are flush with the ground and the lugs go deeper into the ground.
- Page 17 ATTENTION! The greenhouse has a sailing. Do not leave the greenhouse on unfortified ground. When installing a greenhouse in a windy area, additional fastening to the ground with improvised materials (rod, reinforcement, etc.) is required. Do not install the greenhouse in close proximity (less than 2 meters) to buildings, fences or walls.
- Page 18 11. LIMITED WARRANTY OBLIGATIONS 1. The manufacturer guarantees that the greenhouse frame (hereinafter referred to as the product) is new, fully equipped, and free from manufacturing defects. 2. The manufacturer is responsible for completing the product. 3. The manufacturer is responsible for the collection of the product in accordance with the instructions.
- Page 19 Thank you for choosing the DAISY greenhouse which will serve you for decades under proper usage! Due to the continuous improvement of the products the manufacturer reserves the right to make changes in the design without prior notice to the consumer.