Table of Contents
Advertisement
GPS Settings
NOTE: GPS settings and info are available only when the helm control device is connected to a GPS antenna or
a device with GPS capability.
Select
> Global Settings > System > GPS.
Skyview: Shows the relative position of GPS satellites in the sky.
GLONASS: Turns on or off GLONASS data (Russia satellite system). When the system is used in situations with
poor sky visibility, GLONASS data can be used in combination with GPS to provide more accurate position
information.
WAAS/EGNOS: Turns on or off WAAS data (in North America) or EGNOS data (in Europe), which can provide
more-accurate GPS position information. When using WAAS or EGNOS data, the device may take longer to
acquire satellites.
Galileo: Turns on or off Galileo data (European Union satellite system). When the system is used in situations
with poor sky visibility, Galileo data can be used in combination with GPS to provide more accurate position
information.
Speed Filter: Averages the speed of your vessel over a short period of time for smoother speed values.
Source: Allows you to select the preferred source for GPS data.
Viewing System Software Information
You can view the software version and the unit ID number. You may need this information to update the system
software or for troubleshooting purposes.
Select
> Global Settings > System > System Information > Software Information.
Viewing the Event Log
The event log shows a list of system events.
Select
> Global Settings > System > System Information > Event Log.
Viewing E-label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information. Not available on all models.
1 Select
> Global Settings.
2 Select System.
3 Select Regulatory Information.
Preferences Settings
Select
> Global Settings > Preferences.
Units: Sets units of measure.
Language: Sets the on-screen text language.
Filters: Smooths out the values shown in the data fields, which can decrease the noise or show longer term
trends. Increasing the filter setting increases the smoothing and decreasing it reduces the smoothing. A filter
setting of 0 will disable the filter and the value shown will be the raw value from the source. You can also
synchronize these settings across all devices that enable the Sync Filters setting.
Keyboard Layout: Arranges the keys on the on-screen keyboard.
Screenshot Capture: Allows the device to save images of the screen.
Device Settings and Preferences
11
Advertisement
Table of Contents
