CNC-Step Zero-4 Operating Instructions Manual page 2

Zero-4 / 5-Channel Stepper Controller
Brief description
The "Zero-4" control is a further development of the well-known "Zero-3" control.
It contains the complete electronics required to operate a milling machine with up to 4 axes and up
to 5 stepper motors. The hardware interface "CncPod" and the control software KinetiC-NC are
already included.
The connection to the PC takes place directly via the network interface (LAN). This manual
describes the installation, commissioning, and maintenance of the controller.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating Instructions
Zero-4 / 5-Channel Stepper Controller
Page 2
6/16/2021